Please enter search keywords!

Site Map

Site Map

Laser Diode Burn-In & Test

ACBT6208

CoC Burn-In & Test All-in-One System


Leveraging years of proven burn-in and test expertise, Semight ACBT6208 is a high-density, multifunctional, fully automated system designed for CoC laser diode burn-in and test, significantly improving material handling efficiency, test performance, system stability, burn-in capacity, in-process quality monitoring, etc. With high-throughput, stable operation for volume production, the system enables rapid line deployment and efficient production management.
The ACBT6208’s modular architecture enables quick installation, service and product changeover, with testers and burn-in layers configurable for different test conditions. Each burn-in slot is independently controlled for parallel burn-in of different products under different test conditions; product changeover requires only fixture swap.
The system provides a fully closed-loop workflow with optional automation modules that minimize manual intervention and operational risks for mass-production consistency & stability, achieving integrated control with full-process data traceability.



Features

  • Fully Automated Operation

    Closed-loop integration of fishbone fixture I/O, pre-/post-BI test, high-temperature burn-in, binning, and blue tape/Gel-Pak I/O → 50% less floor space, 80% lower labor costs
  • Modular Architecture

    Quick module installation, service, and product changeover
    Multi-size CoCs can be accommodated via fixture swap
  • High-Density Parallel Burn-In

    Temperature range: 25 ~ 130 ℃
    Up to 7,680 independent drive channels
    High-precision current & voltage control
  • In-Situ Burn-In Power Monitoring

    Optional PD modules support in-situ power monitoring and LIV scanning, with test repeatability <1%
  • Efficient Temperature Control & Testing

    Tri-temperature testing from -10°C to 100°C; ±0.5°C accuracy
    Dual-station stage for cyclic temperature control and dual-side parallel testing; LIV + OSA (single current point) < 5 s
  • Intelligent Automated Loading & Unloading

    Standard CoC ID recognition and automatic bin-sorted unloading; unloading time < 4.5 s/CoC
  • Full-Process Data Traceability

    Unified system monitoring
    Closed-loop burn-in, test & unloading data
    Eliminating data silos across standalone equipment

Configuration


Specifications

Gen 1 – ACBT6208

Configuration 1

Configuration 2

Modules

Loader/Unloader

1

1

Testers

2

4

Burn-In Layers

20

16

Fixtures per Layer

8

Driver Board Channels

48 ch/board

Current per Channel

1A

Max. Channels

(DML/EML CoC)

0~1 A

7680

6144

1~2 A

3840

3072

2~3 A

2560

2048


1. Loader/Unloader Module


NG Criterion

No.

Parameter

Specification

No.

Parameter

Specification

1

Magazines

3 blue tape/Gel-Pak

6

Pick-Up

Force-Controlled Nozzle

5 fixture magazines

7

Nozzle Force

35±10g

2

Carrier/magazine

5 × 6-inch blue tape / 8 × 2-inch Gel-Pak

8

Pick-Up Loss

0.1%

8 fishbone fixtures

9

OCR Resolution

5 μm, Color

3

Open Check

10 mA, 1 V

10

Unloading Time

4.5 s/CoC

4

NG Criterion

Open count >3 pcs (customizable)

11

Placement Accuracy

≤±25 μm

5

Nozzle Library

3 types

12

Angle Repeatability

≤±3°


2. Test Module


No.

Parameter

Specification

No.

Parameter

Specification

1

Temp. Control

TEC + water Cooling

11

Standard SMUs

S2011C & S2019C

2

Temp. Range

-10 ℃ - 100 ℃

12

I/V Resolution

±3 A / 100 nA, ±6 V / 1 μV

3

Ramp Rate

20 ℃/min

13

Ith Repeatability

<±1%

4

Set Accuracy

0.1 ℃

14

Se Repeatability

<±2%

5

Ramp Time

180 s between any two temp. points

15

Power Repeatability

<±1%

6

Set Resolution

0.01 ℃

16

Vf Repeatability

<±2%

7

No-Load Uniformity

±1 ℃

17

Wavelength Repeatability

±0.1 nm

8

CoC Temp. Stability

±0.5 ℃

18

SMSR Repeatability

5 dB

9

CoC Temp. Uniformity

±3 °C @ 500 mA, 80 °C (high-force probe)

19

Coupled Power@Pout>25mW

>-15 dBm

10

CoC Temp. Stability

±0.5 ℃@ 500 mA, 80 ℃(product NTC)

20

First-Pass Electrical Connection

>99.7%


3. Burn-In Module


No.

Parameter

Specification

No.

Parameter

Specification

1

Temp. Control

TEC + Water Cooling

9

CoC Temp. Uniformity

±3℃ @ 500mA, 80 ℃(high-force probe)

2

Temp. Range

25-130 ℃

10

CoC Temp. Stability

±0.5℃ @ 500 mA, 80 ℃(product NTC)

3

Ramp Rate

20 ℃/min

11

Source Type

Standard Current Source

4

Set Accuracy

0.1 ℃

12

Current Range

0~1000 mA

5

Set Resolution

0.01 ℃

13

Current Accuracy

0.3% F.S. ± 0.07 mA

6

No-Load Uniformity

±1 °C (2 ends + 3 center points)

14

48h Stability

0.3% F.S. ± 0.07 mA

7

Temp. Stability

±0.5 °C worst-case (2 ends + 3 center points)

15

Current Resolution

0.07 mA

8

Stabilization Time

300 s @ 80 ℃

16

Output Current Ripple

<0.7% F.S., resistive load




Similar recommendation

High Speed Communication Test
High Speed Communication Test

High speed communication test plays an important role in the rapid development of big data, cloud computing, 5G communication and other markets.
Semight offers various of instruments for optical Transceiver/Component testing, including wide bandwidth sampling oscilloscope, NRZ/PAM4 bit error ratio tester , burst error ratio tester, fast wavelength meter, high precise source measure unit, 400G network analyzer ,optical power meter, optical attenuator, optical switch etc. We provide cost-effective, complete solutions for optical testing.

Details
Electronic Measurement
Electronic Measurement

The high-precision source measure units integrates the functions of voltage source, current source, voltmeter, ampere meter, and electronic load in one, which is widely used in high-precision IV test and measurement for various discrete components, photovoltaic, green energy, battery and other industries. Semight provides high-precision benchtop SMU and plug-in PXIe SMU of standard PXIe chassis, fully meeting the application of various test scenarios.

Details
Optical Chip Test
Optical Chip Test

Burn-in testing of laser is an important method to ensure the reliability of laser. Through the test of CoC or bare die, the early failure of laser caused by the defects in the process of laser production can be screened out in advance. Semight provides a complete solution from bare die to CoC, from high temperature(150℃ or higher) to low temperature (-40℃), with CoC automatic loading and unloading system, forming a complete test solution, Semight's laser chip burn-in/load/unload test system has been widely recognized by the market.

Details
Power Device Test
Power Device Test

The front-end test is mainly used in the wafer processing to check whether the processing parameters of the wafer products meet the design requirements or there are defects affecting the yield after each step of the manufacturing process. The back-end test equipment is mainly used after wafer processing to check whether the performance of the chip meets the requirements, which belongs to the electrical performance test. Semight provides solutions such as Wafer Level Burn In system and Known Good Die handler for SiC testing, offering the value to customer in test efficiency improvement and test cost reduction.

Details
Log in

Account number

Password

Register an account

Name

Please enter your name *

E-mail

Please enter your email address *

E-mail verfication code

Please enter your email verification code

Phone

Please enter your contact number

Password

Please enter your login password *

Confirm Password

Please enter your login password again *

Authorization Key

Please enter your Authorization Key
Reset password

E-mail address

Please enter your email number *

E-mail verification code

Please enter your email verification code

New Password

Please enter your login password *

Confirm Password

Please enter your login password again *