Please enter search keywords!

Site Map

Site Map

PXIe Source Measure Unit

S2020C

8-channel PXIe SMU


The S2020C is a compact, highly integrated, single-slot, 8-channel PXIe Source/Measure Unit (SMU). It provides independent voltage and current sourcing and measurement on all eight channels concurrently. Each channel delivers up to ±10 V, ±200 mA output, featuring ultra-high voltage resolution of 1 μV, exceptional current resolution of 1 pA, and high-speed sampling up to 1 MS/s. It supports both DC and pulsed stimulus modes and complies with standard SMU SCPI commands to enable seamless test code migration, while maintaining compatibility with mainstream PXIe chassis.
The single-slot 8-channel architecture enables high-density parallel test configurations and supports multi-card synchronization. Its dense channel arrangement facilitates mid-power parallel test systems, improving test throughput and optimizing system footprint and overall cost.

Features

  • Higher Current Drive

    Operates on a ±10 V platform with current drive capability up to ±200 mA
  • Minimum-Range Accuracy

    ±0.6 V range: accuracy of 0.02% + 50 μV
    ±1 μA range: accuracy of 0.05% + 300 pA
  • High Resolution

    The minimum measurement resolution can reach 0.1 fA/100 nV
  • High Sampling Rate

    Up to 1MS/s ADC sampling rate
  • Adaptive APFC Control

    Adjusts APFC parameters based on load characteristics to balance fast settling and low overshoot
  • Enhanced 4-Wire Measurement

    Covers 100 Ω – 1 MΩ with 1 μV / 1 pA resolution for high-accuracy resistance measurement
  • Protection

    Overtemperature shutdown
    Red LED alerts for overcurrent and overvoltage
    Hardware reset for rapid recovery

Functions and Advantages

  • Integrated DC/Pulse SMU

    Supports both DC and pulsed output up to ±200 mA, with a minimum pulse width of 100 μs and pulse-width resolution as fine as 1 μs. Ideal for pulse I-V sweeps, device thermal characterisation, and other testing applications.

Measurement specifications


No. of Channels

8 channels

Voltage Output

±10 V

Current Output

±200 mA(DC/Pulse)

Voltage Resolution

1 μV

(3 V / 0.6 V ranges)

Current Resolution

1 pA

Max. Sampling Rate

1 MS/s

Voltage Accuracy (Min. Range)

0.02% + 50 μV

(±0.6 V range)

Current Accuracy (Min. Range)

0.05% + 300 pA

(±1 μA range)

Min. Pulse Width

100 μs

Max. Sweep Points

Up to 10⁶ points per sweep

Sense Mode

2-wire/4-wire

Synchronous Trigger

8 internal channels + 1 external DIO

Dimensions

210 × 130 × 20 mm

Weight

≤ 0.48 kg



Typical applications


Scenario

Applications

Optoelectronic Devices & LIV Testing

LIV characterisation of VCSELs, lasers, photodiodes, and other optoelectronic devices.

±200 mA DC/pulse drive supports medium- and high-power photonic chips.

Multi-Channel Parallel Testing

8 channels per card, with synchronised multi-card expansion. Enables parallel source measurement across multiple test sites for PMICs, analogue ICs, and various sensors, increasing test throughput.

New Materials & Device Characterisation

Supports research testing of MEMS, nanomaterials, and third-generation semiconductor devices,

including I-V characterisation, resistance measurement, and pulsed thermal effect analysis.

High-Throughput Production Testing

1 MS/s high-speed sampling combined with fast APFC settling reduces test time per site and lowers the overall cost of multi-channel test systems, improving production line efficiency.



Similar recommendation

High Speed Communication Test
High Speed Communication Test

High speed communication test plays an important role in the rapid development of big data, cloud computing, 5G communication and other markets.
Semight offers various of instruments for optical Transceiver/Component testing, including wide bandwidth sampling oscilloscope, NRZ/PAM4 bit error ratio tester , burst error ratio tester, fast wavelength meter, high precise source measure unit, 400G network analyzer ,optical power meter, optical attenuator, optical switch etc. We provide cost-effective, complete solutions for optical testing.

Details
Electronic Measurement
Electronic Measurement

The high-precision source measure units integrates the functions of voltage source, current source, voltmeter, ampere meter, and electronic load in one, which is widely used in high-precision IV test and measurement for various discrete components, photovoltaic, green energy, battery and other industries. Semight provides high-precision benchtop SMU and plug-in PXIe SMU of standard PXIe chassis, fully meeting the application of various test scenarios.

Details
Optical Chip Test
Optical Chip Test

Burn-in testing of laser is an important method to ensure the reliability of laser. Through the test of CoC or bare die, the early failure of laser caused by the defects in the process of laser production can be screened out in advance. Semight provides a complete solution from bare die to CoC, from high temperature(150℃ or higher) to low temperature (-40℃), with CoC automatic loading and unloading system, forming a complete test solution, Semight's laser chip burn-in/load/unload test system has been widely recognized by the market.

Details
Power Device Test
Power Device Test

The front-end test is mainly used in the wafer processing to check whether the processing parameters of the wafer products meet the design requirements or there are defects affecting the yield after each step of the manufacturing process. The back-end test equipment is mainly used after wafer processing to check whether the performance of the chip meets the requirements, which belongs to the electrical performance test. Semight provides solutions such as Wafer Level Burn In system and Known Good Die handler for SiC testing, offering the value to customer in test efficiency improvement and test cost reduction.

Details
Log in

Account number

Password

Register an account

Name

Please enter your name *

E-mail

Please enter your email address *

E-mail verfication code

Please enter your email verification code

Phone

Please enter your contact number

Password

Please enter your login password *

Confirm Password

Please enter your login password again *

Authorization Key

Please enter your Authorization Key
Reset password

E-mail address

Please enter your email number *

E-mail verification code

Please enter your email verification code

New Password

Please enter your login password *

Confirm Password

Please enter your login password again *