Features

High Sampling Rate
Up to 1M ADC sampling rate
High Range
Range: ±60 V, ±3 A(DC), ±10 A(pulsed)
High Resolution
The minimum measurement resolution can reach 100fA / 100nV
Easy to Expand
It is used in standard PXIe chassis to easily realize multi-channel expansion

Functions and Advantages

5 Functions In One Card
Voltage source
Current source
Ammeter
Voltmeter
Electronic load
♦ The first and third quadrants are the source: the actual polarity of output V / I follows the source setting.
♦ The second and fourth quadrants are for load: CC and CV cooperate. When the load is used, the polarity of the load setting is opposite to the source polarity.
Can Test Various Equipment
Capture More Measurement Data
♦ 6.5-digit resolution: enjoy best-in-class 6.5-digit sourcing and measurement resolution.
♦ 100 fA / 100 nV resolution: excellent sensitivity for setting and measuring.
♦ 1M points / second: provide high-speed measurement, and can quickly set / digitize the rate to any waveform generator / list scan.
Rich Scanning Function
DC I-V Output Capacity
Pulse I-V Output Capacity

Voltage Programming and Measurement Specifications

Voltage Accuracy	Range	Programming Resolution	Accuracy (1 Year) ± (% reading+ offset)^[1]	Typical Noise(RMS) 0.1 Hz-10Hz
	±60 V^[2]	10 μV	0.02%+3 mV	100 μV
	±6 V	1 μV	0.02%+0.3 mV	10 μV
	±0.6 V	100 nV	0.02%+50 μV	5 μV
	±0.06V	100nV^[3]	0.02%+50 μV	3 μV
Temperature Coefficient	±(0.15 × accuracy)/°C (0℃-18℃, 28℃-50℃)
Overshoot	<±0.1% (typical.normal.step is 10% to 90% range, full range, resistive load)
Noise 10Hz-20MHz	6V voltage source, 3A resistive load, <5 mVrms

[1] Accuracy calculation example: To test the accuracy of a 600mV range with a 120mV output, the tolerance is:

[2] This instrument has potentially dangerous high voltage (±63 V) output to the HI / Sense HI / Guard terminals. To prevent electric shock, relevant safety precautions must be taken before powering on. Do not connect the Guard terminal to any output, including shorting it to the chassis ground or output LO, otherwise the instrument will be damaged

[3] Noise Limitations

Current Programming and Measurement Specifications

Current Accuracy	Range	Programming Resolution	Accuracy (1 Year) ± (% reading+ offset)	Typical Noise(RMS) 0.1 Hz-10Hz
	±10 A^[4]	1 μA	0.03% + 2mA	20 μA
	±3 A			20μA
	±1 A	100 nA	0.03% + 90 μA	3 μA
	±100 mA	10 nA	0.03% + 9 μA	200 nA
	±10 mA	1 nA	0.03% + 900 nA	20 nA
	±1 mA	100 pA	0.03% + 90 nA	2 nA
	±100 μA	10 pA	0.03% + 9 nA	200 pA
	±10 μA	1 pA	0.03% +1 nA	30 pA
	±1 μA^[5]	100 fA	0.03% + 200 pA	5 pA
Temperature Coefficient	±(0.15 × accuracy)/°C (0℃-18℃, 28℃-50℃)
Overshoot	<±0.1% (typical.normal.step is 10% to 90% range, full range, resistive load)

[4] 10A range is available only for pulse mode, accuracy specifications for 10A range are typical

[5] A triaxial cable connection is recommended for low current measurement: Hi to the center conductor, Guard to the inner shield, and the outer shield to protective ground; LO to the center conductor, with the inner shield unconnected, and the outer shield to protective ground. The rated insulation voltage of the triaxial cable must be a minimum of 250 V

Pulse Source Specifications

Minimum Programmable Pulse Width				100 μs
Pulse Width Programming Resolution				1 μs
Pulse Width Programming Accuracy				±10 μs
Pulse Width Jitter				2 μs
Pulse Width Definition				The time from 10% leading to 90% trailing edge as follows

Item	Maximums	Maximum Pulse Width	Maximum Duty Cycle
1	0.4 A/50 V	DC, no limit	1
2	1 A/20 V	DC, no limit	1
3	3 A/6.6 V	DC, no limit	1
4	10 A/20 V	1ms	5%
5	10 A/50 V	400 μs	2%

Typical Pulse Performance

Source	Range	Typical Rise Time^[7]	Typical Settling Time^[8]	Test load
Voltage	50 V	280 μs	400 μs	No load
	5 V	60 μs	100 μs	No load
Current	10 A~100 μA	120 μs	250 μs	Full load^[9]
	10 μA	120 μs	300 μs	Full load^[9]
	1 μA	420 μs	600 μs	Full load^[9]

[7] Time required for the pulse leading edge to rise from 10% to 90%

[8] Time required for the pulse to reach within 1% of final value

[9] Test conditions: Normal mode, resistive full load, voltage rises to 6 V

Typical Output Settling Time

Source	Range	Output Settling Time^[10]			Condition
Source	Range	Fast^[11]	Normal	Slow	Condition
Voltage	60 V	<160 μs	<420 μs	<1.6 ms	Time required to reach within 0.1% of final value at open load condition. Step is 10% to 90% range
	6 V	<70 μs	<120 μs	<220 μs
	600 mV	<70 μs	<120 μs	<220 μs
	60 mV	<40 μs	<40 μs	<40 μs
Current	3 A~100 μA	<120 μs	<280 μs	<1 ms	Time required to reach within 0.1% (0.3% for 3 A range) of final value at short condition. Step is 10% to 90% range
	10 μA	<270 μs	<450 μs	<0.8 ms
	1 μA	<720 μs	<900 μs	<1.8 ms

[10] Output slew rate: Fast, Normal, Slow modes. Users can adjust APFC parameters according to load characteristics to achieve appropriate settling time or stability

[11] Fast mode may exhibit significant output overshoot under different ranges or load conditions. For devices sensitive to overshoot, Normal or Slow mode is recommended

Sampling Rate and NPLC Setting

Setting				Range
NPLC				0.00005 PLC ~ 10 PLC
Sampling Rate				5 sps ~ 1 Msps

Derating Accuracy with PLC Setting< 1 PLC

Add % of range using the following table for measurement with PLC < 1

PLC		Range
PLC	60 mV	600 mV	6 V	60 V	1 μA	10 μA	100 μA to 100 mA	1 A to 3 A
0.1	0.04%	0.02%	0.01%	0.01%	0.02%	0.01%	0.01%	0.01%
0.01	0.4%	0.3%	0.03%	0.02%	0.20%	0.04%	0.02%	0.02%
0.001	4%	3.20%	0.40%	0.1%	2.50%	0.4%	0.03%	0.03%

Similar recommendation

High Speed Communication Test

High speed communication test plays an important role in the rapid development of big data, cloud computing, 5G communication and other markets.
Semight offers various of instruments for optical Transceiver/Component testing, including wide bandwidth sampling oscilloscope, NRZ/PAM4 bit error ratio tester , burst error ratio tester, fast wavelength meter, high precise source measure unit, 400G network analyzer ,optical power meter, optical attenuator, optical switch etc. We provide cost-effective, complete solutions for optical testing.

Details

Electronic Measurement

The high-precision source measure units integrates the functions of voltage source, current source, voltmeter, ampere meter, and electronic load in one, which is widely used in high-precision IV test and measurement for various discrete components, photovoltaic, green energy, battery and other industries. Semight provides high-precision benchtop SMU and plug-in PXIe SMU of standard PXIe chassis, fully meeting the application of various test scenarios.

Details

Optical Chip Test

Burn-in testing of laser is an important method to ensure the reliability of laser. Through the test of CoC or bare die, the early failure of laser caused by the defects in the process of laser production can be screened out in advance. Semight provides a complete solution from bare die to CoC, from high temperature(150℃ or higher) to low temperature (-40℃), with CoC automatic loading and unloading system, forming a complete test solution, Semight's laser chip burn-in/load/unload test system has been widely recognized by the market.

Details

Power Semiconductor Test

The semiconductor front-end test is mainly used in the wafer processing to check whether the processing parameters of the wafer products meet the design requirements or there are defects affecting the yield after each step of the manufacturing process. The semiconductor back-end test equipment is mainly used after wafer processing to check whether the performance of the chip meets the requirements, which belongs to the electrical performance test. Semight provides solutions such as Wafer Level Burn In system and Known Good Die handler for SiC testing, offering the value to customer in test efficiency improvement and test cost reduction.

Details

Site Map

Voltage Programming and Measurement Specifications

Current Programming and Measurement Specifications

Pulse Source Specifications

Typical Pulse Performance

Typical Output Settling Time

Sampling Rate and NPLC Setting

Derating Accuracy with PLC Setting< 1 PLC