Please enter search keywords!

Site Map

Site Map

Wafer Level Burn-In

WLBI370B

Wafer Level Burn-in System


The WLBI370B Wafer Level Burn-in System is a high-throughput, fully automated wafer-level burn-in solution. It can simultaneously perform High-Temperature Gate Bias (HTGB) and High-Temperature Reverse Bias (HTRB) burn-in testing on up to 15 wafers, with support for applying negative gate bias during HTRB burn-in. Test durations can be configured from several minutes to thousands of hours to meet the burn-in requirements of different products.
The system integrates fully automated wafer loading and unloading and features a three-cassette to support fast probe card changeover for seamless product changeover while enabling automatic switching of burn-in conditions, ensuring efficient and continuous test operation.


Features

  • Fully Automated System

    Automated wafer and fixture loading/unloading without manual intervention
  • High Throughput

    Supports simultaneous HTGB/HTRB burn-in of up to 15 wafers at full capacity
  • High Compatibility

    Easy switching between 6-inch and 8-inch wafers by replacing fixtures
  • High Probe Mark Repeatability

    Probe mark repeatability: ≤±35 µm
  • Data Traceability

    Supports MAP data binding
  • High-Precision Leakage Current Testing

    Leakage current measurement resolution: 0.1 nA
    Leakage current measurement accuracy: 0.5 nA
  • Wide Temperature Range

    Temperature uniformity: ≤±2 °C @ RT–175 °C
    Temperature accuracy: ≤1 °C; Resolution: 0.1 °C
  • Comprehensive System Functionality

    Real-time Igss and Idss scanning at intervals of ≥1 min
    Integrated parallel Vth testing
    Supports nitrogen purging

Functions and Advantages

  • · Automatic Loading and Unloading: Supports fully automatic wafer loading and unloading, reducing manual intervention and improving burn-in efficiency and test accuracy.

    · High Throughput: Fully configured system supports simultaneous HTGB / HTRB burn-in for up to 15 wafers.

    · Wide Compatibility: Enables fast probe card replacement and supports mixed burn-in tests for 6-inch and 8-inch wafer products.

    · Three Load Ports Configuration: Equipped with 3 load ports to allow simultaneous loading for three cassettes.

    · Fast Probe Card / Product Changeover: Probe card and product switching time ≤ 20 minutes.

    · Active Cooling: As an optional configuration, each burn-in single layer can be equipped with a water-cooling plate to improve cooling efficiency.

    · Vth Measurement: Integrated parallel Vth parameter testing; completes Vth measurement of 2000 channels within 2 minutes at fastest speed.






Suitable for

SiC / GaN

Applicable Packages

6-inch, 8-inch Wafer

Burn-in Type

HTGB, HTRB, IDSX/HTRB negative gate(0 ~ -30)

Test Parameters

Igss, Idss, Vth

System Size

4800W X 5250D X 2550H

Arcing Protection

N2 Pressure up to 3bar

Temperature Range

RT to 175°C

Voltage Range

Gate ±70V
Drain 2000V

System Channels/ Layer

1500/2560

System Layers

12/15

Supports Cassette Feeding

Up to 15 PCS

Uploading area: 3 loadports (cassettes)
If wafer warp is less than 500μm, it can accommodate 25 pcs.
If wafer warp is between 500μm and 3mm, it can accommodate 13 pcs.

Power Supply

380V, 63A three-phase, 50-60Hz
220V, 40A 1Phase, 50-60Hz

Software System

Windows

Software Language Environment

VS/C#

Similar recommendation

High Speed Communication Test
High Speed Communication Test

High speed communication test plays an important role in the rapid development of big data, cloud computing, 5G communication and other markets.
Semight offers various of instruments for optical Transceiver/Component testing, including wide bandwidth sampling oscilloscope, NRZ/PAM4 bit error ratio tester , burst error ratio tester, fast wavelength meter, high precise source measure unit, 400G network analyzer ,optical power meter, optical attenuator, optical switch etc. We provide cost-effective, complete solutions for optical testing.

Details
Electronic Measurement
Electronic Measurement

The high-precision source measure units integrates the functions of voltage source, current source, voltmeter, ampere meter, and electronic load in one, which is widely used in high-precision IV test and measurement for various discrete components, photovoltaic, green energy, battery and other industries. Semight provides high-precision benchtop SMU and plug-in PXIe SMU of standard PXIe chassis, fully meeting the application of various test scenarios.

Details
Optical Chip Test
Optical Chip Test

Burn-in testing of laser is an important method to ensure the reliability of laser. Through the test of CoC or bare die, the early failure of laser caused by the defects in the process of laser production can be screened out in advance. Semight provides a complete solution from bare die to CoC, from high temperature(150℃ or higher) to low temperature (-40℃), with CoC automatic loading and unloading system, forming a complete test solution, Semight's laser chip burn-in/load/unload test system has been widely recognized by the market.

Details
Power Device Test
Power Device Test

The front-end test is mainly used in the wafer processing to check whether the processing parameters of the wafer products meet the design requirements or there are defects affecting the yield after each step of the manufacturing process. The back-end test equipment is mainly used after wafer processing to check whether the performance of the chip meets the requirements, which belongs to the electrical performance test. Semight provides solutions such as Wafer Level Burn In system and Known Good Die handler for SiC testing, offering the value to customer in test efficiency improvement and test cost reduction.

Details
Log in

Account number

Password

Register an account

Name

Please enter your name *

E-mail

Please enter your email address *

E-mail verfication code

Please enter your email verification code

Phone

Please enter your contact number

Password

Please enter your login password *

Confirm Password

Please enter your login password again *

Authorization Key

Please enter your Authorization Key
Reset password

E-mail address

Please enter your email number *

E-mail verification code

Please enter your email verification code

New Password

Please enter your login password *

Confirm Password

Please enter your login password again *