Features

High-precision
Resolution up to 1 fA/100 nV
High Range, High-speed Measurement
Range: ±200 V, ±1 A(DC), ± 3 A (pulsed)
Supports a maximum sampling rate of 1M
Adaptive PFC System
Utilize Adaptive PFC
(Precise-Fast Control) System
Users can adjust relevant parameters based on load characteristics
Building A Single-channel Testing System
Based on standard PXIe chassis, easy to expand

Functions and Advantages

5 Functions In One Card
Voltage source
Current source
Ammeter
Voltmeter
Electronic load
♦ The first and third quadrants are the source: the actual polarity of the output V/I follows the source setting.
♦ The second and fourth quadrants are for load: CC and CV cooperate. When the load is used, the polarity of the load setting is opposite to the source polarity.
Test Various Devices
Capture More Measurement Data
♦ 6-and-a-half-bit digital resolution: the accuracy is equivalent to a 6-and-a-half-bit digital multimeter.
♦ 1 fA/100 nV resolution: excellent sensitivity for setting and measuring.
♦ 1M points/second: Provides high-speed measurement and can quickly set/digitize the rate for any waveform generator/list scanning.
Rich Scanning Functions
DC I-V Output Capability
Pulse I-V Output Capability

Voltage Programming and Measurement Specifications

Voltage Accuracy	Range	Measurement Resolution	Accuracy (1 year) ± (% reading+offset)^[1]	Typical Noise (RMS) 0.1 Hz-10 Hz
	±200 V^[2]	100 μV	0.03%+10 mV	400 μV
	±40 V	10 μV	0.03%+2 mV	100 μV
	±20V	10 μV	0.03%+1 mV	50 μV
	±2 V	1 μV	0.03%+100 μV	10 μV
	±0.6 V	100 nV	0.03%+50 μV	2 μV
Temperature Coefficient	±(0.15 × accuracy)/℃ (0℃-18℃, 28℃-50℃)
Overshoot	<±0.1% (typical, normal mode, step is 10% to 90% range, full range, resistive load)
Noise 10Hz-20MHz	<5 mVrms, (20V voltage source, 1A resistive load)

[1] Accuracy calculation example: To test the accuracy of a 600mV range with a 120mV output, the tolerance is:

[2] This instrument has a potentially dangerous high voltage (±210 V) output to the HI / Sense HI / Guard terminals. To prevent electric shock, relevant safety precautions must be taken before powering on. Do not connect the Guard terminal to any output, including shorting it to the chassis ground or output LO, as this will damage the instrument

Current Programming and Measurement Specifications

Current Accuracy	Range	Measurement Resolution	Accuracy (1 year) ± (% reading+offset)	Typical Noise (RMS) 0.1 Hz-10 Hz
	±3 A^[3]	1 μA	0.03% + 2mA	20 μA
	±1 A	100 nA	0.03% + 90 μA	4 μA
	±100 mA	10 nA	0.03% + 9 μA	600 nA
	±10 mA	1 nA	0.03% + 900 nA	60 nA
	±1 mA	100 pA	0.03% + 90 nA	6 nA
	±100 μA	10 pA	0.03% + 9 nA	700 pA
	±1 μA^[4]	100 fA	0.03% + 200 pA	20 pA
	±10 nA^[4][5]	10 fA	0.06% +9 pA	600 fA
	±1 nA^[4][5]	1 fA	0.1% +3 pA	60 fA
	±100 pA^[4][5]	1 fA	0.3% +1 pA	30 fA
Temperature Coefficient	±(0.15 × accuracy)/℃ (0℃-18℃,28℃-50℃)
Overshoot	<±0.1% (typical. normal mode. step is 10% to 90% range, full range, resistive load)

[3] 3 A range is available only for pulse mode, with typical accuracy

[4]For accurate low current measurements, triaxial cable connection is recommended. Converting the triaxial output to standard wiring will affect current measurement accuracy

[5] Condition: NPLC = 10 PLC

Pulse Source Specifications

Minimum Programmable Pulse Width	100 μs
Pulse Width Programming Resolution	1 μs
Pulse Width Programming Accuracy	± 10 μs
Pulse Width Jitter	2 μs
Pulse Width Definition	The time from 10% leading to 90% trailing edge as follows

Item	Maximums	Maximum Pulse Width	Maximum Duty Cycle
1	0.1 A/200 V	DC, no limit	100%
2	1 A/20 V	DC, no limit	100%
3	3 A/66.6 V	1 ms	5%
4	3 A/160 V	400 μs	2%

Typical Pulse Performance

Source	Maximum Output	Typical Rise Time^[6]	Typical Settling Time^[7]	Test Load
Voltage	160 V	800 μs	1.2 ms	No load
Voltage	5 V	50 μs	100 μs	No load
Current	3A~100 μA	100 μs	250 μs	Full load^[8]
	100 μA	150 μs	400 μs	Full load^[8]
	1 μA	800 μs	1.2 ms	Full load^[8]
	10 nA	5 ms	20 ms	Full load^[8]
	1 nA	10 ms	50 ms	Full load^[8]
	100 pA	100 ms	500 ms	Full load^[8]

[6] Time required for the pulse leading edge to rise from 10% to 90%

[7] Time required for the pulse to reach within 1% of final value

[8] Test conditions: Normal mode, resistive full load, voltage rises to 6 V

Typical Output Settling Time

Source	Range	Output Settling Time^[9]			Condition
Source	Range	Fast^[10]	Normal	Slow	Condition
Voltage	200 V	<600 μs	<1.2 ms	<2 ms	Time required to reach within 0.1% of final value at open load condition. Step is 10% to 90% range
	40 V	<200 μs	<400 μs	<900 μs
	20 V	<100 μs	<200 μs	<600 μs
	2 V	<300 μs	<300 μs	<300 μs
	0.6 V	<300 μs	<300 μs	<300 μs
Current	3 A~1 mA	<150 μs	<200 μs	<0.8 ms	Time required to reach within 0.1% (0.3% for 3A range) of final value at short condition. Step is 10% to 90% range
	100 μA	<150 μs	<250 μs	<0.8 ms
	1 μA	<1 ms	<1 ms	<1 ms
	10 nA	<10 ms	<10 ms	<10 ms
	1 nA	<50 ms	<50 ms	<50 ms
	100 pA	<500 ms	<500 ms	<500 ms

[9] Output slew rate: Fast, Normal, Slow modes. Users can adjust APFC parameters according to load characteristics to achieve appropriate settling time or stability

[10] Fast mode may exhibit significant output overshoot under different ranges or load conditions. For devices sensitive to overshoot, Normal or Slow mode is recommended

Site Map

Voltage Programming and Measurement Specifications

Current Programming and Measurement Specifications

Pulse Source Specifications

Typical Pulse Performance

Typical Output Settling Time