PXIe Source Measure Unit
S2019C
4-channel PXIe SMU
The S2019C is a high precision, compact, cost-effective, 4-channel PXIe Source/Measure Unit (SMU) with the capability to source and measure both voltage and current. It has maximum ±40 V, ± 500 mA(DC), ±1A(Pulse) sourcing capability, and supports conventional SCPI commands for easy programming. It supports most standard PXIe chassis and multi-card synchronization. The S2019C can be integrated into production test environment to achieve test efficiency improvement and cost reduction.
Features
Easy to Expand
4-channel PXIe SMU, easy to scale out
High Range
Range: ± 40 V, ± 500 mA (DC), ±1A(pulse)
High Resolution
The minimum measurement resolution can reach 1 pA/1 μV
High Sampling Rate
Up to 1MS/s ADC sampling rateFunctions and Advantages
5 Functions In One Card
Voltage source
Can Test Various Equipment
Capture More Measurement Data
♦ 6.5-digit resolution: Enjoy best-in-class 6.5-digit sourcing and measurement resolution.
Rich Scanning Function
|
Voltage Accuracy |
Range |
Resolution |
Accuracy（1 year） ±（%RD+mV）[1] |
Typical Noise (RMS) 0.1 Hz-10 Hz |
|
±40 V[3] |
10μV |
0.015%+1.2 mV |
50 μV |
|
|
±6 V |
1 μV |
0.015%+600 μV |
10 μV |
|
|
Temperature Coefficient |
±(0.15×accuracy)/℃(0℃-18℃, 28℃-50℃) |
|||
|
Channel [2] |
CH0 to CH3 |
|||
|
Output Power |
4 W per channel and maximum 8 W total |
|||
|
Overshoot |
<±0.1%( typical, Normal, step is 10% to 90% range, full range, resistive load) |
|||
|
Noise 10Hz-20MHz |
6 V voltage source, 0.5 A resistive load, <3 mVrms |
|||
[1] Accuracy calculation example: Testing the accuracy of a 1V output in a 6V range, the
allowable tolerance is:
[2] All channel outputs are electrically isolated from the ground, but the outputs of each channel share a common ground（LO）
[3] This instrument has a potential danger of high voltage (±42 V) output to the HI/Sense HI/Guard terminals. To prevent electric shock, relevant safety precautions must be taken before powering on. Do not connect the Guard terminal to any output. (Including shorting to the chassis ground or outputLO)，otherwise, the instrument will be damaged
|
Current Accuracy |
Range |
Resolution |
Accuracy(1 year) |
Typical Noise (RMS) 0.1Hz-10Hz |
|
±1 A[4][5] |
500 nA |
0.1% + 125 μA |
20 μA |
|
|
±500 mA[5] |
||||
|
±100 mA |
100 nA |
0.03% + 25 μA |
2 μA |
|
|
±10 mA |
10 nA |
0.03% + 2.5 μA |
200 nA |
|
|
±1 mA |
1 nA |
0.03% + 250 nA |
20 nA |
|
|
±100 μA |
100 pA |
0.03% + 25 nA |
2 nA |
|
|
±10 μA |
10 pA |
0.03% + 3 nA |
200 pA |
|
|
±1 μA |
1 pA |
0.03% + 500 pA |
30 pA |
|
|
Temperature Coefficient |
±(0.15×accuracy)/℃(0℃-18℃，28℃-50℃) |
|||
|
Channel |
CH0 to CH3 |
|||
|
Output Power |
4 W per channel and maximum 8 W total |
|||
|
Overshoot |
<±0.1%(typical. normal. step is 10% to 90% range, full range, resistive load) |
|||
[4] The 1A range only supports pulse mode, with a typical accuracy
[5] The 1A and 500mA ranges only support a voltage range of 6V
Similar recommendation
High speed communication test plays an important role in the rapid development of big data, cloud computing, 5G communication and other markets.
Semight offers various of instruments for optical Transceiver/Component testing, including wide bandwidth sampling oscilloscope, NRZ/PAM4 bit error ratio tester , burst error ratio tester, fast wavelength meter, high precise source measure unit, 400G network analyzer ,optical power meter, optical attenuator, optical switch etc. We provide cost-effective, complete solutions for optical testing.
The high-precision source measure units integrates the functions of voltage source, current source, voltmeter, ampere meter, and electronic load in one, which is widely used in high-precision IV test and measurement for various discrete components, photovoltaic, green energy, battery and other industries. Semight provides high-precision benchtop SMU and plug-in PXIe SMU of standard PXIe chassis, fully meeting the application of various test scenarios.
Details
Burn-in testing of laser is an important method to ensure the reliability of laser. Through the test of CoC or bare die, the early failure of laser caused by the defects in the process of laser production can be screened out in advance. Semight provides a complete solution from bare die to CoC, from high temperature(150℃ or higher) to low temperature (-40℃), with CoC automatic loading and unloading system, forming a complete test solution, Semight's laser chip burn-in/load/unload test system has been widely recognized by the market.
Details
The semiconductor front-end test is mainly used in the wafer processing to check whether the processing parameters of the wafer products meet the design requirements or there are defects affecting the yield after each step of the manufacturing process. The semiconductor back-end test equipment is mainly used after wafer processing to check whether the performance of the chip meets the requirements, which belongs to the electrical performance test. Semight provides solutions such as Wafer Level Burn In system and Known Good Die handler for SiC testing, offering the value to customer in test efficiency improvement and test cost reduction.
DetailsFollow
Name
E-mail verfication code
Phone
Password
Confirm Password
E-mail address
E-mail verification code
New Password
Confirm Password
Ask for demo
