Standard Benchtop SMU
S3012H
Single-channel Precision SMU
The S3012H is compact and cost-effective benchtop Source/ Measure Units (SMUs) with the capability to source and measure both voltage and current. These capabilities make the S3012H ideal for a wide variety of IV (current versus voltage) measurement tasks that require both high resolution and accuracy.
Features
High Range
Range: ±200 V, ±3 A (DC), ±10 A (pulse)
High Resolution
Minimum measurement resolution up to 100 fA/100 nV
High Sample Rate
Up to 1M ADC sampling rate can be supported
Hardware Synchronization
Single machine and multi-machine synchronization, pure hardware high-speed synchronization, can achieve multi-channel low-latency synchronizationFunctions and Advantages
(5) Functions In One Body
Power source
♦ The first and third quadrants are the source: the actual polarity of the output V/I follows the source setting.
♦ The second and fourth quadrants are the load: CC and CV cooperate, when the load is used, the load setting polarity is opposite to the source polarity.
Various Devices Can Be Tested
Capture More Measurement Data
♦ 6½-digit digital resolution: the accuracy is equivalent to a 6½-digit digital multimeter.
Rich Scanning Functions
|
|
Range | Programming Resolution |
Accuracy (1 Year) ± (% reading+ offset) |
Typical Noise (RMS) 0.1 Hz-10Hz |
|||
| ±200 V | 1 mV | 0.02% + 30 mV | 1.5 mV | ||||
| ±20 V | 100 μV | 0.02% + 2 mV | 160 μV | ||||
| ±6 V | 50 μV | 0.02% + 500 μV | 36 μV | ||||
| ±200 mV | 1 μV | 0.02% + 120 μV | 4 μV | ||||
| Temperature Coefficient | ±(0.15 × accuracy)/°C (0℃-18℃,28℃-50℃) | ||||||
| Maximum Output Power | 30W: ±20V@1.5A; ±200V@0.1A; 18W: ±6 V@3A | ||||||
| Settling Time | <800 μs (typical) | ||||||
| Overshoot | <±0.1% （6 V voltage source, normal. step is 10% to 90% range, full range, esistive load) | ||||||
| Noise 10Hz-20MHz | <3 mVrms（6 V voltage source, 3 A resistive load） | ||||||
|
Current Programming Accuracy |
Range | Programming Resolution |
Accuracy (1 Year) ± (% reading+ offset) |
Typical Noise (RMS) 0.1 Hz-10 Hz |
|||
| ±10 A[1] | 50 μA | 0.4% + 40 mA | NA | ||||
| ±3 A | 15 μA | 0.05% + 2 mA | 40 μA | ||||
| ±1.5 A | 10 μA | 0.02% + 500 μA | 20 μA | ||||
| ±150 mA | 1 μA | 0.02% + 25 μA | 5 μA | ||||
| ±15 mA | 100 nA | 0.02% + 6 μA | 700 nA | ||||
| ±1.5 mA | 10 nA | 0.02% + 250 nA | 16 nA | ||||
| ±150 μA | 1 nA | 0.02% + 25 nA | 1 nA | ||||
| ±15 μA | 100 pA | 0.02% + 3 nA | 140 pA | ||||
| ±1.5 μA | 10 pA | 0.03% + 450 pA | 25 pA | ||||
| ±150 nA | 1 pA | 0.05% + 250 pA | 5 pA | ||||
| Temperature Coefficient | ±(0.15 × accuracy)/°C (0℃-18℃,28℃-50℃) | ||||||
| Maximum Output Power | 30W: ±20V@1.5A, ±200V@0.1A; 18W: ±6 V@3A | ||||||
| Settling Time | <500 μs (typical) | ||||||
| Overshoot | <±0.1% (6 V voltage source, normal. step is 10% to 90% range, full range, resistive load) | ||||||
[1] 10 A range is available only for pulse mode, accuracy specifications for 10 A range are typical
|
|
Range | Measurement Resolution | Accuracy (1 Year) ± (% reading+ offset) | ||||
| ±200 V | 100 μV | 0.02% + 30 mV | |||||
| ±20 V | 10 μV | 0.02% + 2 mV | |||||
| ±6 V | 1 μV | 0.02% + 500 μV | |||||
| ±200 mV | 100 nV | 0.02% + 120 μV | |||||
| Temperature Coefficient | ±(0.15 × accuracy)/°C (0℃-18℃, 28℃-50℃) | ||||||
|
|
Range | Measurement Resolution | Accuracy (1 Year)± (% reading+ offset) | ||||
| ±10 A[1] | 10 μA | 0.4% + 25 mA | |||||
| ±3 A | 10 μA | 0.05% + 2 mA | |||||
| ±1.5 A | 1 μA | 0.02% + 500 μA | |||||
| ±150 mA | 100 nA | 0.02% + 25 μA | |||||
| ±15 mA | 10 nA | 0.02% + 6 μA | |||||
| ±1.5 mA | 1 nA | 0.02% + 250 nA | |||||
| ±150 μA | 100 pA | 0.02% + 25 nA | |||||
| ±15 μA | 10 pA | 0.02% +3 nA | |||||
| ±1.5 μA[2] | 1 pA | 0.03% + 450 pA | |||||
| ±150 nA[2] | 100 fA | 0.05% + 250 pA | |||||
| Temperature Coefficient | ±(0.15 × accuracy)/°C (0℃-18℃, 28℃-50℃) | ||||||
|
|
Range | Measurement Resolution | Test Current | Typical Accuracy(1 Year)±(% reading+ offset) | |||
| 1 Ω | 1 μΩ | 1.5 A | 0.073% +0.3334 mΩ | ||||
| 10 Ω | 10 μΩ | 150 mA | 0.057% + 3.334 mΩ | ||||
| 100 Ω | 100 μΩ | 15 mA | 0.08% + 33.34 mΩ | ||||
| 1 kΩ | 1 mΩ | 1.5 mA | 0.057% + 333.4 mΩ | ||||
| 10 KΩ | 10 mΩ | 150 μA | 0.057% + 3.334 Ω | ||||
| 100 kΩ | 100 mΩ | 15 μA | 0.06% + 33.34 Ω | ||||
| 1 MΩ | 1 Ω | 1.5 μA | 0.06% + 333.4 Ω | ||||
| 10 MΩ | 10 Ω | 0.15 μA | 0.35% + 3.334 kΩ | ||||
| 100 MΩ | 100 Ω | 0.05 μA | 0.95% + 10 kΩ | ||||
|
Temperature Coefficient
|
±(0.15 × accuracy)/°C
(0℃-18℃,28℃-50℃) |
||||||
Source I mode, Manual Ohm Measurement (4-wire) | Total error = Vmeas/Isrc = R reading x (gain error % of V range + gain error % of I range + offset error of I source range/Isrc value %) + (offset error of V measure range/Isrc value) Example:I source value=1.5A at 1.5A range V measure range=6V range Total error (% reading + offset) = (0.02%+0.02%+500μA/1.5A+(500μV/1.5A) ≈ 0.073%+0.3334mΩ | ||||||
| Minimum Programmable Pulse Width | 100 μs | ||||||
| Pulse Width Programming Resolution | 1 μs | ||||||
| Pulse Width Programming Accuracy | ±10 μs | ||||||
| Pulse Width Jitter | 2 μs | ||||||
| Pulse Width Definition | The time from 10% leading to 90% trailing edge as follows |
| Item | Maximums | Maximum Pulse Width | Maximum Duty Cycle | ||||
| 1 | 0.15 A/200 V | DC, no limit | 1 | ||||
| 2 | 1.5 A/20 V | DC, no limit | 1 | ||||
| 3 | 3 A/6 V | DC, no limit | 1 | ||||
| 4 | 3 A/20 V | 1ms | 0.1 | ||||
| 5 | 10 A/6 V | 1ms | 0.1 |
Similar recommendation
High speed communication test plays an important role in the rapid development of big data, cloud computing, 5G communication and other markets.
Semight offers various of instruments for optical Transceiver/Component testing, including wide bandwidth sampling oscilloscope, NRZ/PAM4 bit error ratio tester , burst error ratio tester, fast wavelength meter, high precise source measure unit, 400G network analyzer ,optical power meter, optical attenuator, optical switch etc. We provide cost-effective, complete solutions for optical testing.
The high-precision source measure units integrates the functions of voltage source, current source, voltmeter, ampere meter, and electronic load in one, which is widely used in high-precision IV test and measurement for various discrete components, photovoltaic, green energy, battery and other industries. Semight provides high-precision benchtop SMU and plug-in PXIe SMU of standard PXIe chassis, fully meeting the application of various test scenarios.
Details
Burn-in testing of laser is an important method to ensure the reliability of laser. Through the test of CoC or bare die, the early failure of laser caused by the defects in the process of laser production can be screened out in advance. Semight provides a complete solution from bare die to CoC, from high temperature(150℃ or higher) to low temperature (-40℃), with CoC automatic loading and unloading system, forming a complete test solution, Semight's laser chip burn-in/load/unload test system has been widely recognized by the market.
Details
The semiconductor front-end test is mainly used in the wafer processing to check whether the processing parameters of the wafer products meet the design requirements or there are defects affecting the yield after each step of the manufacturing process. The semiconductor back-end test equipment is mainly used after wafer processing to check whether the performance of the chip meets the requirements, which belongs to the electrical performance test. Semight provides solutions such as Wafer Level Burn In system and Known Good Die handler for SiC testing, offering the value to customer in test efficiency improvement and test cost reduction.
DetailsFollow
Name
E-mail verfication code
Phone
Password
Confirm Password
E-mail address
E-mail verification code
New Password
Confirm Password
Ask for demo
