Bit Error Ratio Tester
PBT8812/PBT8812B
800G Bit Error Ratio Tester
Features
Data Rate
Range: 24.33~57.8 GBaud
High-precision
Supports ultra-fast and high-precision BER sampling (<10ms).
Error Injection
Supports error injection and input and output polarity switching
Link Compensation
Provides 3/4/7-tap FIR tuner,
Various Patterns
PRBS7~31Q; SSPRQ /JP03A /JP03B /LIN /Square Wave/Custom Defined Patterns, etc
Comprehensive Capabilities
PCS layer of RS-FEC analyzer with Pre/Post BER statistic and Margin alarm.
Excellent Signal Quality
Rapid rise and fall time;
Fully Match ATE Application Scenarios
Powerful and flexible database management capabilities.Functions and Advantages
Real FEC Analysis
SNR Monitor
Real-time Data Monitoring
Real-time bit error monitoring
Historical Data Query
Data stored in local database|
Type |
Item |
PBT8812/8812B |
|
|
Pattern Generator |
Output |
Differential/ Single-ended PAM4 / NRZ |
|
|
Terminal |
AC Coupling, 1.85 mm female connector |
||
|
Impedance |
100 Ω ± 10% |
||
|
Test Patterns |
PRBS9/11/13/15/16/23/31, PRBS9Q/11Q/13Q/15Q/16Q/23Q/31Q, |
||
|
Symbol Data Rate[1] (GBaud) |
24.33/24.8832/25/25.78125/26.5625/27.89/27.95/28.05/28.125/28.2/28.9/ |
||
|
Frequence Accuracy |
±1400 PPM（1 PPM Step） |
||
|
Output Amplitude (Differential) |
1000 mVp-p |
||
|
Rise Time[2] (20–80%) |
<10 ps |
||
|
Fall Time[2] (20–80%) |
<10 ps |
||
|
Random Jitter |
<350 fs |
||
|
Insertion Loss |
1.48 dB @ 28GHz (Odd Channel) 2.78 dB @ 28GHz (Even Channel) |
||
|
Return Loss |
≤-13.6 dB @ ≤28GHz |
||
|
MON CLK[3] |
Clock Output Amplitude |
>300mVp-p |
|
|
Output Type |
AC coupled, Single-ended |
||
|
Div Ratio[3] |
4/8/16/32 |
||
|
Connector |
MXPD/SMPS |
||
[1] Expansion rate requires activation of the EDR option
[2] Measured with 53.125 Gbps NRZ signal
[3] Extended frequency division ratio options require activation of the TRIG option
|
Type |
Item |
PBT8812/8812B |
|
Error Detector |
Input |
Differential PAM4 / NRZ |
|
Terminal |
AC Coupling |
|
|
Impedance |
100 Ω+/- 10% |
|
|
Input Range[1] (Differential) |
Max.1000 mVp-p |
|
|
Sensitivity[2] (Differential) |
80 mVp-p |
|
|
Test Patterns |
PRBS7/9/11/13/15/23/31 |
|
|
Symbol rate[3] (Gbaud) |
24.33/24.8832/25/25.78125/26.5625/27.89/27.95/28.05/28.125/28.2/28.9/ 48.66/49.7664/50/51.5625/53.125/56/56.25/56.4/57.8 |
|
|
Clock Mode |
Built-in Clock Recovery (Loop bandwidth:4MHz) |
|
|
Connector |
1.85 mm female, 50Ω |
[1] Net measurement value at the receiving end; Excessively high voltage input may damage the receiver
[2] When the input amplitude is less than the sensitivity threshold, the corresponding bit error rate may be higher than e-3 or even LOS, depending on the specific signal quality
[3] Extended rate requires activation of the EDR option
Similar recommendation
High speed communication test plays an important role in the rapid development of big data, cloud computing, 5G communication and other markets.
Semight offers various of instruments for optical Transceiver/Component testing, including wide bandwidth sampling oscilloscope, NRZ/PAM4 bit error ratio tester , burst error ratio tester, fast wavelength meter, high precise source measure unit, 400G network analyzer ,optical power meter, optical attenuator, optical switch etc. We provide cost-effective, complete solutions for optical testing.
The high-precision source measure units integrates the functions of voltage source, current source, voltmeter, ampere meter, and electronic load in one, which is widely used in high-precision IV test and measurement for various discrete components, photovoltaic, green energy, battery and other industries. Semight provides high-precision benchtop SMU and plug-in PXIe SMU of standard PXIe chassis, fully meeting the application of various test scenarios.
Details
Burn-in testing of laser is an important method to ensure the reliability of laser. Through the test of CoC or bare die, the early failure of laser caused by the defects in the process of laser production can be screened out in advance. Semight provides a complete solution from bare die to CoC, from high temperature(150℃ or higher) to low temperature (-40℃), with CoC automatic loading and unloading system, forming a complete test solution, Semight's laser chip burn-in/load/unload test system has been widely recognized by the market.
Details
The semiconductor front-end test is mainly used in the wafer processing to check whether the processing parameters of the wafer products meet the design requirements or there are defects affecting the yield after each step of the manufacturing process. The semiconductor back-end test equipment is mainly used after wafer processing to check whether the performance of the chip meets the requirements, which belongs to the electrical performance test. Semight provides solutions such as Wafer Level Burn In system and Known Good Die handler for SiC testing, offering the value to customer in test efficiency improvement and test cost reduction.
DetailsFollow
Name
E-mail verfication code
Phone
Password
Confirm Password
E-mail address
E-mail verification code
New Password
Confirm Password
Datasheet
Ask for demo
